Search
parking-CCD-Car-Front-View-vehicle-Logo-Camera-for-Toyota-series-Toyota-Prado-Highlander-Land-Cruiser
Wire or Wireless:Wire Shell Material:Plastic Lens Material:Plastic + Glass
Length of Video Cable:6M Alarm Type:Vehicle Backup Cameras
Material Type:Abs View Angle:170 degree
Place of Origin:Guangdong, China (Mainland) Item Type:Parking Assistance
Wire or Wireless:Wire Material Type:ABS Effective Pixels:728*582
Night vIsion:0.05 LuxImage Sensor: CCD 1/3" Waterproof:YES
make for:For vw Car Front View Camera

CCD camera is high clear, better quality than the Colorful CMOS and CMD 

 CCD Car rear view car camera for:

toyota front logo series Toyota Prado Highlander Land Cruise......

1

-4

PLS kindly Take Note as below :

To be safe, please pay attention to dimension picture before buying. Please contact us if you are not sure.Please kindly make sure that our product's size is same with your car' s license plate light, because there may have a little difference even for the same style car but in different country.
This camera will replace one of the license plate lights.
 

QQ3

 

Specification:                                     CCD chips description

Image Sensors                                   1/3"  Color CCD

TV System                                            NTSC/PAL

Effective Pixels                                   728X582/728x512

Resolution (TV Lines)                         480

Minimum illumination                          <0.1 Lux / F1.2

Horizontal Sync.Frequency                15.625 KHZ

Vertical Sync.Frequency                     50 HZ

Video Output                                        75 Ohm

Gamma Consumption                          0.45

AGC: Auto                                             BLC:Auto

Night Vision                                          Yes

IP Rating:                                               IP66 100% waterproof

S/N ratio                                                  Better than 48dB

lens                                                          F=1.6

Lens Angle (Deg.)                                  170 Degree

Current Consumption (mA)                   85~115

Shutter speed                                         1/50(PAL)1/60(NTSC),1/100,000

Power Supply (DC V)                              12

Operating Temperature (Deg.C)           -20~+75(RH95% Max.)

Storage Temperature (Deg.C)              -40~+85(RH95% Max.)

 

 

Main Features : 
 
High Clear , Night Vision,Water Proof, Plastic material.
 
170 degree view angle, very small, and easy for installing
 
Low illumination and fill light automatic, waterproof
 
Designed according to the license light hole install.
 
All you need is a screen and video input port.

 

Package:

1 x Waterproof Car RearView Backup CCD Camera
1 x 5M video cable
1 X power supply cable
1 x user manual

 

5

  • Take out your stock license plate light at the back of your car.
  • Fix the camera to where the stock license plate light was.
  • Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
  • Connect the power of the camera to your brake lights - red wire to positive and black wire to negative.
  • Connect the video cable of the camera to the extension cord.
  • Connect the extension cord to your car monitor.
  • You will see the images when your car is in reverse shift.