Search
CAR-CCD-SONY-REAR-VIEW-REVERSE-BACKUP-PARKING-Mirror-Image-CAMERA-FOR-Ssangyong-Rexton
Item Type:Alarm Systems & Security is_customized:Yes Voltage:12V
Place of Origin:China (Mainland)

CCD Rear view Reverse Backup SONY CHIP Camera for 

 
Ssang Yong   Rexton II
Ssang Yong   Kyron

 

PLS kindly Take Note as below :
To be safe, please pay attention to dimension picture before buying. Please contact us if you are not sure.

 

Please kindly make sure that our product's size is same with your car' s license plate light, because there may have a little difference even for the same style car but in different country.  
This camera will replace one of the license plate lights.
 

   

Technique Parameter:

Image sensors: 1/4" color sony CCD Chip

TV System: NTSC default

Minimum illumination. <0.1

AGC: Auto

BLC: Auto

White Balance: Auto

Video Color: Colorful

Effective Pixels : 728x512

Resolution : 520TV lines (Normal CMOS/CCD/CMD camera is 420 TV Lines)

Video Output: 1.0Vp-p,75?

Electronic Shutter: 1/60(NTSC)-1/10000S, 1/50(PAL)-1/10000S

S/N ratio: Better Than 48db

Lens Angle: 170 Degree

Waterproof Class:Ip 68

Operation Temperature: -20°C+80°C RH95%

Storage Temperature: -30°C+80°C

Working Power (DCV): 12

Current consumption: 90mA Max

Ssang Yong   Rexton II
Ssang Yong   Kyron


 How to Install

  • Take out your stock license plate light at the back of your car.
  • Fix the camera to where the stock license plate light was.
  • Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
  • Connect the power of the camera to your brake lights - red wire to positive and black wire to negative.
  • Connect the video cable of the camera to the extension cord.
  • Connect the extension cord to your car monitor.
  • You will see the images when your car is in reverse shift.