Search
Wireless 4.3 inch CCD Monitor Reverse Camera for Mercedes-Benz S-Class S-Klasse GLK300 GLK3503


CCD camera is high clear, better quality than the Colorful CMOS and CMD.

Note: with the 2.4 GHz wireless module, no need to turn the video cable inside the car, less labor work, easy install 

CCD Special Car Rear View Camera for:

Mercedes-Benz
Benz S-Class S-Klasse GLK300 GLK350
 
Please kindly take note as below:
     To be safe, Please notice the size on the picture before buying. Please contact us, if you are 
not familiar with our products.Make sure that the size of our product as nearly the same as your 
car’slicense plate light. In different countries, even for the same style car the size of license plate 
light maybe different.
    This camera will replace the license plate lights. 





Camera Specification: 
Image device: Hi-definition Color CCD
TV system: NTSC 60HZ / PAL 50HZ
Effective pixels: 628X582 pixels
Resolution: 520 TV lines
Lens Angle: 170 degree
Power supply: DC 12V
 
Video transmitter& receiver 
1. 100% brand new, high quality, easy installation
2. Take one minute to get your camera become a wireless camera
3. Wireless 2.4 GHz transmitter/receiver set ( Vehicle voltage12 Volt)
4. Work range: Up to about 50m (hollowness)
5. Connect to rear view camera and front video screen
6. Fit all RCA composite video connections
7. Power: DC 12V
8. Transmitter /receiver cable: 1.5m
 
Monitor Specification:
1.Screen size: 4.3 inch (diagonal length)
2.Aspect Ratio : 16: 9 image
3.Input:2 ways video inputs
4.System: PAL & NTSC auto-switching
5.Resolution: 420 x R.G.B x 272 dots, high resolution, digital panel
6.Power supply: DC 12 V-24V
7.Compact design
8.Sunshade design around
9.switch function stand
10.Suitable for camera/DVD/VCD player
  
Package Included: 
1x 4.3" Car Monitor
1x Monitor Power Cable
1x CCD Camera
1x 2.4 Ghz Transmitter
1x 2.4 Ghz Receiver

How to Install a Camera with the Wireless Module: 
Take out your stock license plate light at the back of your car.  
Fix the camera to where the stock license plate light was.  
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power  
Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power
Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
You will see the images when your reverse car.