Search
Wireless 4.3 inch Foldaable Monitor CCD Reverse Camera for RAV4 RAV-4 Porte


CCD camera is high clear, better quality than the Colorful CMOS and CMD.

Note: with the 2.4 GHz wireless module, no need to turn the video cable inside the car, less labor work, easy install

CCD Special Car Rear View Camera for:
 
 TOYOTA RAV4 2006-2010, 2012 year

Please kindly take note as below:
    To be safe, Please notice the size on the picture before buying. Please contact us, if you are not
familiar with our products.Make sure that the size of our product as nearly the same as your car’s
license plate light. In different countries, even for the same style car the size of license plate light 
maybe different.
    This camera will replace the license plate lights.


Camera Specification:
Image sensors: 1/4" Color CCD Chip
TV System: NTSC (PAL version should be required)
Minimum illumination. <0.1
Video Color: Colorful
Effective Pixels : 728x512
Resolution : 520TV lines (Normal CMOS/CCD/CMD camera is 420 TV Lines)
Video Output: 1.0Vp-p,75Ω
Lens Angle: 170 Degree
Waterproof Class:Ip 68
Operation Temperature: -20°C+80°C RH95%
Storage Temperature: -30°C+80°C
Working Power (DCV): 12 V
Current consumption: 90mA Max

Video transmitter& receiver
1. 100% brand new, high quality, easy installation
2. Take one minute to get your camera become a wireless camera
3. Wireless 2.4 GHz transmitter/receiver set ( Vehicle voltage12 Volt)
4. Work range: Up to about 50m (hollowness)
5. Connect to rear view camera and front video screen
6. Fit all RCA composite video connections
7. Power: DC 12V
8. Transmitter /receiver cable: 1.5m
 
Monitor Specification:
Housing material:ABS plastic
- Screen size: 4.3 inch
- Pixel: 480(W)×RGB×272(H)
-Contrast: 350:1
- Aspect ratio: 16:9
- Power supply: DC 12V
- Monitor folded size: 5.2 * 4.5 * 0.98 inches
2 Video Input
AV Signal auto detect power on/off
Auto switch when reversing

Package Included:
1x 4.3" Car Monitor
1x Monitor Power Cable
1x CCD Camera
1x 2.4 Ghz Transmitter
1x 2.4 Ghz Receiver


How to Install a Camera with the Wireless Module: 
Take out your stock license plate light at the back of your car.  
Fix the camera to where the stock license plate light was.  
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power  
Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power
Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
You will see the images when your reverse car.